Shandong Jinan Supply of epoxy zinc phosphate anti-rust primer genuine aluminum special product engineering machinery primer epoxy zinc phosphate-based epoxy resin composition, anti-rust pigments, additives and alcohol mixed solvent configuration from the double component special primer Features 1, room temperature curing, fast drying, saving energy. 2, toxicity, with general epoxy anti-rust primer benzene poisoning can be dangerous and customer service compared to organic amine poisoning 3, of cast iron, steel castings, steel structures have excellent adhesion and protective properties; can solder, cut and excellent performance. 4, high mechanical strength of the film, impact resistance, flexibility, and excellent anti-corrosion properties. 5, two-component mixture, using period up to 48 hours. Use 1, widely used in medium-sized machinery, general machinery, machine tools, transport vehicles used under a variety of conditions, especially for construction machinery 2, it is widely used as a shop primer coating application just pretreatment. Specifications Item Index Color and appearance experimental methods gray, yellow, red and other colors, the film formation GB / T1729-79 Viscosity (Tu -4 cups) / s 60-90 GB / T1729-79 dry 20 minutes drying schedule Hard work 24 hours Adhesion level 1 GB / T1729-79 impact strength kg.cm 50 GB / T1729-79 Flexibility mm ≤2 GB / T1729-79 hardness pencil hardness greater than H protective properties of the ink test 21 days A method heat salt water 144 A method by hour storage stability: one year, more than the storage period. Passing inspection can still be used. (Allowed to increase the viscosity of the paint as long as the deployment of special thinner to achieve the desired viscosity can) spraying methods: spray, roller and brush to use Surface preparation: In order to achieve the desired coating quality, coating the surface must by mechanical or chemical pre-treatment, the surface level to reach Sa2.5 that remove scale, rust |, oil, dust and other stolen goods face exposed metallic luster, paint: The paint uses a two-component package before use should be two groups were stir, then press finish component (a): component (B) component = 7: 1 (weight ratio), said material mixing, stir, then put it aside for 20-30 minutes, then use. Construction is completed, the gun and the tools and equipment with thinner to clean. Construction environment to relatively dry, the temperature should not be too low. Preferably above 10 ℃ is appropriate. Construction site should maintain good ventilation, avoid fire this paint acceptance specifications, packaging, storage, transportation according to the Executive Jinan Supply of epoxy zinc phosphate anti-rust primer using genuine products with special aluminum coating method